< back to search

critical Security update for multipath-tools
SUSE-SLE-Micro-6.0-832

This update for multipath-tools fixes the following issues: Update to version 0.9.8+292+suse.c0523c1. Security issues fixed: - kpartx: integer overflow in the GPT partition table size calculation can lead to heap OOB read via crafted USB device or disk image(bsc#1268145). - kpartx: missing bounds check can lead to a DASD VOL1 unbounded array write via a crafted DASD disk with more than 256 consecutive format labels (bsc#1268144). Other updates and bugfixes: - [Build 32.2] System with multipath fails to boot during first boot during the installation (bsc#1232063). - [Build 50.1] multipath btrfs i/o error on both Leap 15.6 and SLES 15 SP6 (bsc#1219289). - Fix code that leads to `is_bit_set_in_bitfield: bitfield overflow: 1 >= 0` message showing up in syslog (bsc#1255285). - Version 0.9.8+266+suse.53479977 (bsc#1257007): * kpartx: fix segfault when operating on regular files (bsc#1257244, bsc#1257153) * multipathd: print path offline message even without a checker (bsc#1254094) * Fix command descriptions in the multipathd man page. * Fix ISO C23 compatibility issue causing errors with new compilers. * Fix memory leak caused by not joining the "init unwinder" thread. * Fix memory leaks in kpartx. * Print the warning "setting scsi timeouts is unsupported for protocol" only once per protocol. * Make sure multipath-tools is compiled with the compiler flag `-fno-strict-aliasing`. (gh#opensvc/multipath-tools#130, bsc#1255285) - Version 0.9.8+247+suse.863ae86f: * Log offline path state if "log_checker_err always" is set - Version 0.9.8+246+suse.fb81edd2: * CI: GitHub workflow updates. No code changes. - Version 0.9.8+166+suse.95399ce1: - Backported fixes from upstream 0.9.9 ... 0.10.5 (bsc#1253260) * Updates to the built-in hardware table: - add some NVMe storage array (VASTData, Infinidat, HITACHI VSP) - add QSAN - add EqualLogic PS - Add Quantum devices - Enable ALUA for AStor/NeoSapphire - Update NFINIDAT/InfiniBox config - Fix product blacklist of S/390 devices - Add Seagate Lyve - Add HITACHI VSP One SDS Block - Add SCST (SCSI Target Subsystem for Linux) - Huawei storage arrays - XSG1 vendors * Avoid a possible system hang during shutdown with queueing multipath maps. * Failed paths should be checked every `polling_interval`. In certain cases, this wouldn't happen, because the check interval wasn't reset by multipathd. * It could happen that multipathd would accidentally release a SCSI persistent reservation held by another node. Fix it. * After manually failing some paths and then reinstating them, sometimes the reinstated paths were immediately failed again by multipathd. * Fixed the problem that, if there were multiple maps with deferred failback (`failback` value > 0 in `multipath.conf`), some maps might fail back later than configured. * Fixed a problem in the marginal path detection algorithm that could cause the io error check for a recently failed path to be delayed. * Fixed a minor bug in the config file parser * Fixed minor issues detected by coverity. - Version 0.9.8+111+suse.b7ee850: - Backported bug fixes from upstream 0.9.9 - 0.10.2 * Fixed old mpathpersist bug leading to the error message "configured reservation key doesn't match: 0x0" when `reservation_key` was configured in the multipaths section of `multipath.conf`. (bsc#1228926, gh#opensvc/multipath-tools#92) * Fixed bug that caused queueing to be always disabled if flushing a map failed (bug introduced in 0.9.8). (bsc#1229898) * Fixed output of `multipath -t` and `multipath -T` for the options `force_sync` and `retrigger_tries`. (bsc#1229898, gh#opensvc/multipath-tools#88) * libmultipath: don't print error message if WATCHDOG_USEC is 0 (bsc#1232227) * Fix map failure count for no_path_retry > 0 (bsc#1229898) * Fix reboot hang if uevent is processed for suspended device (bsc#1232063) * libmultipath: don't set dev_loss_tmo to 0 for NO_PATH_RETRY_FAIL (bsc#1229898) * Fixed a memory leak in the nvme foreign library. (bsc#1229898, bsc#1236390) * Fix multipathd crash because of invalid path group index value, for example if an invalid path device was removed from a map. (gh#opensvc/multipath-tools#105, bsc#1236392) * Fix the problem that `group_by_tpg` might be disabled if one or more paths were offline during initial configuration (bsc#1236392) * Make sure udev and systemd notice changes in multipath path state when devices are added to or removed from multipath maps (bsc#1236321) - Version 0.9.8+88+suse.d504d83: * Revert "libmultipath: fix max_sectors_kb on adding path" (bsc#1222458) - Update to version 0.9.8+87+suse.f72b9f3: * fix misspelled DM_UDEV_DISABLE_OTHER_RULES_FLAG in udev rules (bsc#1220810) - Remove libmpathpersist-example-old.c, which has been obsolete since multipath-tools 0.8.6. - Version 0.9.8+83+suse.bcae610 (bsc#1220374): * multipath-tools: added NEWS.md - Version 0.9.8~1+82+suse.dcd98a3: * Adapt package version such that it shows as a 0.9.8 prerelease * Add missing udev rules file - Version 0.9.7+148+suse.9780ae0: * 11-dm-mpath.rules: Fix quoting mistake (bsc#1219142) - Version 0.9.7+148+suse.7d9953e.obscpio * This is a multipath-tools 0.9.8 pre-release * fix fast_io_fail for Infinibox (bsc#1219348) * Fix activation of LVM volume groups during coldplug (bsc#1219142) - Version 0.9.7+140+suse.2d78457: * Socket activation via multipathd.socket has been disabled by default because it has undesirable side effects on systems without multipath. Users with multipath hardware should enable multipathd.service * The restorequeueing CLI command now only enables queueing if disablequeueing had been sent before * Avoid multipathd hang during map flush * multipathd now tracks the queueing mode of maps in its internal features string * Improve error messages in 'multipathd -k' * Fix segfault in autoresize code (bsc#1219289) * Fix missing map reloads (bsc#1219796) * Documentation fixes, spelling fixes, minor code fixes - Version 0.9.7+93+suse.e2f2272: * fix ANA prioritizer enablement logic (bsc#1218326) * avoid setting queue_if_no_path on multipath maps for which the no_path_retry timeout has expired * the interactive commands "restorequeueing map X" and "restorequeing maps" now only affect maps that had queueing manually disabled using "disablequeuing maps" or "disablequeuing map X" beforehand * Spelling fixes - Version 0.9.7+76+suse.5f857af: * Update to upstream 0.9.7 (jsc#PED-6464) * added max_retries config option to limit SCSI retries * added auto_resize config option to enable resizing multipath maps automatically * fixed memory and error handling for code using aio (marginal path code, directio path checker) * dropped modules-load.d/multipath.conf; replaced by a dependency on modprobe@dm-multipath.service (systemd >= 245: SLE15-SP3 and later only) and a softdep on sd_mod for the SCSI device handlers (bsc#1217377) * On SLE/Leap suse-module-tools doesn't ship a scsi_mod->sd_mod softdep yet. Add it here, too. It will be overridden by s-m-t when it's added there. * drop usr_prefix= setting in SLE build recipes (set to /usr by upstream automatically) - Version 0.9.6+115+suse.07776fb * multipathd: Added support to handle FPIN-Li events for FC-NVMe - Update to version 0.9.6+110+suse.5dfdf35: * The options "bindings_file", "prkeys_file", and "wwids_file", which have been deprecated since multipath-tools 0.8.8, aren't supported any more. The paths to these files are now hard-coded to "bindings", "prkeys" and "wwids" under /etc/multipath. * Strictly avoid assigning map aliases that are already taken (bsc#1213265) * Improve handling of user-friendly names * avoid "multipath -d" (dry-run) changing SCSI timeouts in sysfs (bsc#1213809) - `spec` file: * adapt prefix values to upstream changes * fix compilation flags for `make check` * pass EXTRAVERSION to build (bsc#1212854)

cloud_download Downloads

SUSE Linux Micro 6.0 s390x
  • Packages
    kpartx
    Manages partition tables on device-mapper devices
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    libmpath0
    Libraries for multipath-tools
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    multipath-tools
    Tools to Manage Multipathed Devices with the device-mapper
    0.9.8+292+suse.c0523c1-1.1 lock rpm
SUSE Linux Micro 6.0 aarch64
  • Packages
    kpartx
    Manages partition tables on device-mapper devices
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    libmpath0
    Libraries for multipath-tools
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    multipath-tools
    Tools to Manage Multipathed Devices with the device-mapper
    0.9.8+292+suse.c0523c1-1.1 lock rpm
SUSE Linux Micro 6.0 x86_64
  • Packages
    kpartx
    Manages partition tables on device-mapper devices
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    libmpath0
    Libraries for multipath-tools
    0.9.8+292+suse.c0523c1-1.1 lock rpm
    multipath-tools
    Tools to Manage Multipathed Devices with the device-mapper
    0.9.8+292+suse.c0523c1-1.1 lock rpm